Sailing yachts

Paul Gartside Cold Moulded Bermudan Sloop

(REF: 29679)

£17000

  • Designer: Paul Gartside
  • Year: 2003
  • Location: Hants
  • Length on deck: 21'
  • Beam: 7'
  • Draft: 3'7"
  • Tonnage: 4000lbs displacement

Enquire about Paul Gartside Cold Moulded Bermudan Sloop

Call us: +44(0)1803 833899

Email us: info@woodenships.co.uk

Alternatively please fill in this form and we will contact you about this boat

  • If you are having trouble with this form you can email us at info@woodenships.co.uk
  • This field is for validation purposes and should be left unchanged.

Apply for finance

Visit our partner’s website to apply for finance

Apply now
Enquire about this boat

Full specification

Wooden Ships Comments on this Paul Gartside Bermudan Sloop

Designed by Paul Gartside and built by the first owner, launched in 2003.

The brief to Gartside was for a ‘strong, tight and easily handled no-nonsense boat, capable of beating to windward in adverse conditions’.

The builder was limited in size by his barn, hence her overall length of 21’.  The construction utilises modern glues with multi layered timber to create a very tough and durable hull that requires minimal maintenance and will withstand very tough sailing conditions.

In 2013/2014 the previous owner, a professional shipwright, bought the boat and carried out a refit with a new engine and systems, new electrics, added cockpit tents and other gear.  More recently the rig has been upgraded with a stack pack system on the boom and roller furling on the headsail.

This is an unusual and very capable little boat in excellent condition and very well equipped for short handed offshore cruising.  Sold with a custom made yard bogey trailer.

Survey and rig report from October 2024 available.

 

Length on Deck                          21’

Length Waterline                       17’10”

Beam                                            7’

Draft                                             3’7”

Displacement                             4000lbs

Sail Area                                      232sqft

Construction

Hull

1” cold moulded hull.  ½” Douglas fir strip planking bonded, overlaid with 2 diagonal layers of khaya and a final fore and aft layer.

All bonded with Aerodux 500 resorcinol glue.

Laminated iroko backbone and supporting knees.

Laminated wooden floors across the centreline.

Plywood bulkheads and knees bonded into the hull for added strength.

The hull has been glass fibre sheathed internally below the waterline.  Finished with CopperCoat externally.

 

Deck

Marine plywood deck made from 2 layers bonded together.  Sheathed in glass cloth and finished with 2 pack non-slip deck paint.

Painted toe rail all round with a scrubbed iroko rubbing strake.

Stainless steel pushpit, pulpit and stanchions.

 

Superstructure and Cockpit

Laminated  coachroof coamings with a sheathed coachroof deck made from laminated douglas fir and Khaya.  Grab rails on the coachroof deck.

Forehatch for ventilation.

Self draining cockpit with thwarts either side.  Tiller steering on a transom hung rudder.

Rig

Masthead Bermudan sloop rig on a deck stepped varnished spruce mast in a stainless steel tabernacle.

Slab reefing varnished spruce boom.  Mainsail stack-pack system from Ratseys new in 2023.

 

Standing Rigging

Stainless steel standing rigging to external bronze chain plates.  Rigging new in 2003.  Full professional rig check in October 2024.

Simply rigged with twin standing backstays, twin lower shrouds, single cap shroud and a forestay.

Selden Furlex 50S roller furling headsail new in 2019.

 

Sails

Mainsail from Kemp Sails, 2003.  Furling headsail, 2019.  2 x older hanked headsails.

 

Winches

Pair of self tailing Antal W8 cockpit sheet winches.

Machinery

Engine

Beta 16hp twin cylinder diesel engine, installed new in 2013.  Less than 100 hours use.

Stainless drip tray beneath the engine.

TMC 40R2 gearbox to a fixed 3 blade bronze propeller, new in 2013.

New cutlass bearing 2013, plus spare.

 

Tanks

Vetus 20 litre plastic fuel tank port side in the cockpit.

40 litre stainless steel water tank under the forward berth.

 

Batteries and Electrics

2 x 12 volt batteries.  74ah for engine start and 65ah for domestic.  New in 2024.

Accommodation

3 berths including a quarter berth and a large double V berth in the bows.

Companion steps into the cabin with a quarter berth to starboard.

Galley to port with an Optimus 2 burner paraffin stove.  Single stainless sink with electrically pumped fresh water.  Sink drains into a stainless steel waste tank.

2 single berths either side of the mast compression post have an infill to create a double V-berth.  Shelf storage either side.

Forward bulkhead with access hatch to storage space in the bows plus chain locker.

Porta Potti 335 toilet fits in the cabin.

Equipment

Plastimo steering compass

Garmin Echomap chart plotter

Garmin sounder

Garmin DSC VHF

Simrad tiller pilot

 

6kg Kobra anchor with 10 fathoms x 7mm chain +24 fathoms x 14mm warp

6 x Fenders

Mooring warps

 

Sprayhood with integrated cockpit tent

Full ‘mast down’ winter cover

 

Auto electric bilge pump

Manual bilge pump

2 x 1kg fire extinguishers

 

Bunk and berth cushions

Cockpit cushions

Cockpit table

Optimus 2 burner paraffin stove

Cabin heater hot plates for Optimus stove

 

Spare engine filters

 

Yard bogey trailer (piggy backs on road trailer).

Wooden Ships classic yachts brokers have an extensive database of boats for sale. With a wide range of sailboats, classic yachts, motor yachts and small classic boats, Wooden Ships has one of the largest selections of traditional wooden boats and yachts for sale in the UK.

Disclaimer:

These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.