Small craft
14′ varnished clinker motor launch
(REF: 32365)£7950
Full specification
Wooden Ships Comments on this 14′ varnished clinker motor launch
Clinker motor launch designed and built in Salcombe by Fred Bennett in 1995. She is based on the original local river launches often used for hire boats and is an elegant launch built and maintained to a good standard.
Fitted with a well maintained Yanmar 1GM10 engine.
Length 13’7”
Beam 5’3”
Construction
Clinker planked in pine, possibly pitch pine, all copper rivet fastened to steam bent oak timbers.
Mahogany transom with a laminated oak stem.
Oak rubbing strakes with mahogany gunwhales. Rope fender all round.
Small fore and aft decks with straight laid mahogany planking. Bronze fairleads and cleats.
Mahogany thwarts with cushions and a seat back to the midships thwart.
Wheel steering from a small wheel mounted on the port gunwhale by the midships thwart.
Transom hung mahogany rudder.
Machinery
Yanmar 1GM10 single cylinder diesel
Fixed 3 blade bronze propeller gives 5 knots.
Copper fuel tank hung under the foredeck.
Single lever engine controls by the wheel.
Equipment
Heavy duty road trailer
Spare wheel
All over fitted cover
Anchor and warp
Fuel can
Boat hook
Oars and rowlocks
Mooring warps
Wooden Ships classic yachts brokers have an extensive database of boats for sale. With a wide range of sailboats, classic yachts, motor yachts and small classic boats, Wooden Ships has one of the largest selections of traditional wooden boats and yachts for sale in the UK.
Disclaimer:
These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.
