Wooden Ships Comments on this 16′ launch 

A well built and sturdy launch which has just had a thorough refit and is now in excellent structural and cosmetic condition and is in regular use by the owners.

 

The large beam means she is a very stable launch with a lot of carrying capacity for her length, but at only  16′ long she is suitable for dinghy berths and landing pontoons making her a very useable river launch.

16′ Launch

Construction

Clinker planked in Larch all copper fastened to steamed timbers.

 

Varnished mahogany sheer strake, rubbing strake and gunnels.

 

Varnished mahogany thwarts with plywood knees.

 

Solid larch sole boards painted with non-slip paint.

 

Small sheathed plywood aft deck gives a good size storage locker beneath.

 

 

 

Machinery

Lister  2cyl raw water cooled diesel with a stainless shaft to a 3 blade bronze propeller.

 

Recent professional engine overhaul .  New starter motor and water pump.  Injectors serviced.  New remote stern greaser fitting and remote water intake filter.

 

New plastic  fuel tank under the centre thwart with an in line fuel filter and water separator

 

Twin batteries under the aft deck.

 

2 new electric bilge pumps and 1 manual.

 

New cleats, fendering and warps.    Includes anchor and rowlocks.

 

Disclaimer:

These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.