Sailing yachts

Clinker sailing dinghy

(REF: 18503)


  • Location: Glasgow
  • Length on deck: 13'6"
  • Beam: 5'6"

Enquire about Clinker sailing dinghy

Please fill in this form and we will contact you about this boat

Apply for finance

Visit our partner’s website to apply for finance

Apply now

Full specification

Wooden Ships Comments on this Clinker sailing dinghy

Clinker rowing dinghy, place and date of build unknown.  Professionally refitted in 2018, all necessary work to the hull has been done, trailer serviced and she is ready to tow away and use this summer.

She is a pretty boat with a nice sheer, varnished inside and out except for white painted bilges.  She has 2 rowing positions that are well positioned so she can be rowed comfortably with either one or two people.

Now in smart and sound condition after her recent refit, a very tidy and ready to use

Length                  13’6″

Beam                   5’6″



Clinker planked in p[itch pine all copper rivet fastened to steam bent oak timbers.

Varnished oak transom with a transom hung rudder with a galvanised dropping blade.

Sawn oak floors across the centreline, unusually rigid and strong design for a dinghy of this type.

Galvanised centre plate in a solid wooden varnished box, raised on a tackle.

Varnished pitch pine thwarts and slatted sole boards

Varnished oak rubbing strake with strengthened positions for the 2 pairs of bronze rowlocks




Single bermudan mainsail on a painted wooden keel stepped mast with a varnished wooden boom.

White terylene sail.

Stainless steel rigging to stainless hoop chain plates with lanyards.




Road trailer with new tyres and bearings

Rig with spars and sail

Buoyancy bags

Anchor and warp

Manual bilge pump

2 pairs of oars and rowlocks





Full specification and details available upon request





These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.