Sailing yachts

Paul Gartside Skylark

(REF: 22189)

£9000

  • Designer: Paul Gartside
  • Builder: Matthew Taylor Lyme Regis Boat Building College
  • Year: 2018
  • Location: Devon
  • Length on deck: 14'
  • Beam: 5'8"
  • Tonnage: 250kg

Enquire about Paul Gartside Skylark

Please fill in this form and we will contact you about this boat

Apply for finance

Visit our partner’s website to apply for finance

Apply now
Enquire about this boat

Full specification

Wooden Ships Comments on this Paul Gartside Skylark

Professionally built in 2018 to the Paul Gartside Skylark design.  A pretty lug rigged dinghy, complete with trailer and cover, perfect for messing about on the water.

In superb condition, she has been used only a handful of times and stored undercover since new.

She was built on the Boat Building training course at Lyme Regis and has been finished to a high standard as would be expected.

Smart condition, on her trailer and ready to tow away for fun afloat this summer.

 

Length                                  14’

Beam                                    5’8”

Weight                                 Approx 250kg

Sail Area                               88sqft

 

 

Construction

Clinker planked in khaya mahogany, copper fastened to steam bent oak timbers.

Oak stem and sapele back bone.  Khaya transom with oak fashion pieces and oak stern knee

Quarter knees are steam bent oak with a sapele insert.  Sawn mahogany breast knee.

Oak rubbing strake and inwhale fastened through with copper rivets.  2 rowing positions in the gunnels.

Sapele thwarts on an oak stringer.  Supporting knees are steam bent oak with a sapele insert.

Sapele slatted sole boards lift out in sections.

Sapele centreboard case with an oak top.  Galvanised centreplate, raised with a block and tackle which runs aft to a jamming cleat so it can be easily reached from the helm position.

Transom hung rudder made from mahogany with a lifting oak blade.  Bronze rudder hangings.

Hull is finished with satin varnish externally and Deks Olje D1 internally.

 

 

Rig

Lug rig on an unstayed varnished Spruce mast.  Stepped on the keel through a supporting beam at gunnel level.

Varnished spruce boom and lug yard.  Stitched leather on the spars where necessary.

Tan mainsail in Clipper Canvas with 2 reefing points.  Main sheets to a rope horse across the centre thwarts.

Running rigging in traditional 3 strand rope with tuffnel blocks.

 

 

Equipment

Galvanised road trailer from Admiral Trailers

Rudder and tiller

Galvanised centreplate

Mast, boom and yard

Mainsail

Running rigging

Sole boards

Pair of oars

Pair of bronze rowlocks

All over mooring cover

 

 

 

 

Full specification and details available upon request

 

 

 

Disclaimer:

These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.

 

 

Enquire about this boat
Print specification