Wooden Ships Comments
The Uffa Fox designed Swordfish was the fore runner to the Albacore, built by Fairey Marine in 1957 in 3 ply Agba veneers, fitted with a steel centre plate giving good stability. Maintained to an exceptionally high standard, comprising of summer cotton cover, autumn/spring new PVC cover, new Goacher main & jib, used spinnaker plus 2 unused spinnakers, additional new mast, galvanised launch trolley and combination road trailer plus all transporting equip. This boat is fully kitted and ready to race with a Portsmouth Yardstick of 1117, or cruise with Swallows & Amazons. The boat will readily plane in a fresh breeze at well over 10 knots and has high stability because of its weight. Keep this boat garaged during frosty weather and covered when not sailing and it will last another 50 years.
Hot moulded 3 ply Agba veneers. Hull varnished inside and out. Built in buoyancy tanks.
Steel centreplate, epoxy painted, 75lbs. Winch operated (Skeleton lightweight)
Twin stainless steel Elvstrom self bailers.
Bermudan Sloop. Alloy spars, carbon spinnaker pole. Sail area main and jib 125sq ft. Spinnaker approx 60sq ft. Continuous spinnaker sheet. Jib sheets with quick release snap shackle. Cascade tensioning for kicker. Cascade tensioning for jib forestay. Pockets for main halyard and jib halyard tails. Spinnaker sock.
Goacher main and jib, only 2 seasons use. 2 unused spinnakers.
Spiro fitting on mast for flyaway pole
Unused spare mast with slight delivery damage to foot area.
2 inflatable buoyancy bags
Galvanised launching trolley
Road trailer, easy load roller, new wheel bearings
2 lighting boards, 1 with built in mast support
Tie down straps
Summer over boom cotton cover
Spring and autumn PVC over boom cover, only 2 seasons use.
Spare sheets of veneers to repair any damage
These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.