Share this boat:

Sailing yachts

Yachting World 15 sailing dinghy

(REF: 19154)


  • Builder: Trummy Hutton, Fife
  • Location: Cumbria
  • Length on deck: 15'

Enquire about Yachting World 15 sailing dinghy

Call us: +44(0)1803 833899

Email us:

Alternatively please fill in this form and we will contact you about this boat

Apply for finance

Visit our partner’s website to apply for finance

Apply now

Full specification

Share this boat:

Wooden Ships Comments on this Yachting World 15 sailing dinghy

Built by Trummy Hutton of Burntisland, Fife just after WW2 and she was one of the founding boats of the Burntisland Sailing Club and always thought of as their No.1 boat.  She is a Yachting World 15 design and one of a pair built by Hutton, although this was always known to be the better boat.

Her history has been very well documented and she was raced regularly in Scotland before being sold to Blackpool where she was owned by a family for many years who sailed her a lot including around the western Isles of Scotland.  After that she had a refit with David Moss Boat Builders who fitted her current gunter rig and repaired the seam around the base of the centreboard box.

In current ownership she had a complete professional refit by Patterson Boatworks in Hawkshead and is now in excellent condition, on an as new trailer and looking very smart.



Clinker planked in what looks to be Spruce, all varnished inside and out.  Copper rivet fastened to steam bent oak timbers.

Mahogany sheer strake and capping rail with a small oak rubbing band.

Oak stem and keel with a mahogany transom.

Mahogany thwarts with laminated oak knees.

Mahogany centreboard box with a galvanised steel centreplate operated with a block and tackle.

Small foredeck of laid mahogany and oak, all varnished.

Mahogany rudder and tiller with bronze rudder hangings




High peak gunter rig on a keel stepped varnished pine mast with varnished boom and gunter yard.

Stainless steel standing rigging to external bronze chain plates.  Bronze stem head fitting for the jib.

Rig was made by David Moss Boatbuilders to be light and easy to set up.

Mainsail and jib by Jeckells sails.




Yamaha 2.5hp outboard

Indespension road trailer

All over cover for storage

All over cover with mast hole.

Mast supports for travelling/storage


Buoyancy bags

Bronze bilge pump

Pair of oars and rowlocks


Rudder and tiller

Mast and spars

Running and standing rigging

Mainsail and jib

Lightboard and straps for towing




Full specification and details available upon request





These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.